You can add the selected instruction from the pull-down menu using the '+' button:

Addin Welding - Image 5

The instruction templates are in the following folder (default RoboDK installation):

C:\RoboDK\Addins\com.robodk.app.welding\WeldingAddIn\templates

Addin Welding - Image 6

Templates are presented as regular '.csv' files with the string format 'parameter->value':

Addin Welding - Image 7

Note: The first four lines should be as shown in the picture above.

1.‘Process’ ➔ ‘Process name’ (some name should be specified)

2.‘Code’ ➔ ‘Instruction code’ (one of the supported instruction codes)

3.‘Color’ ➔ any color code in the hex format

4.‘Shape’ ➔ file name with the shape model for the welding instructions

Note: The shape name should be the same as the file name. By default, the folder with shape models is: C:\RoboDK\Addins\com.robodk.app.welding\WeldingAddIn\models.

Addin Welding - Image 8

Note: Up to 96 additional user parameters are supported (following the first 4 predefined parameters).

Adding an instruction to the instruction list